Web Analytics Made Easy - StatCounter

Infrastructure Facility Tenders

Get complete information related to latest Infrastructure Facility Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Infrastructure Facility Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Infrastructure Facility Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :40315390 Due date: 06 Jun, 202506 Jun, 2025 NA
Tender For improvement to gang huts in the section of sse/p.way/mb under aden/hq/mb & heavy repair of road surface at various level crossings in the section of sse/w/ch under aden/ch. estimate no. 02/2025 & 256/2024

State Government

CTN :40274747 Due date: 02 Jun, 202502 Jun, 2025 NA
Tender For supply of forestry and plantation fencing material - group no 5 -, galvanized steel barbedgalvanized steel barbedline wire - galvanised steel wire of 2.5 mm diameter point wire - galvanised steel wire of 2.5 mm diameter. barbs - distance between two boards 75 mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns. standard- conforming to is-278-2009, galvanized steel chain linkmesh wire - galvanised steel wire of 3.15 mm diameter fabric size - 100x100 mmheight - 150 cmline wire - 2 numbers of line wires of 4.00 mm diameterstandard- conforming to is-2721-2003, with up to date - amendments., rcc poles 2 mtrtype - straight length - 2.0 mdimensions - bottom 10x10 cm square, top 8x8 cm square. cement concrete mix - cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is : 456:2000 reinforcement - 4 round vertical bars of 6 mm diameter. 11 no. of stirrups of 6 mm diameter round ms bars 20 cm centre to centre. hooks- 5 no, bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bttom. manufacturing- in order to ensure desired compressive strength , rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm., rcc poles 2.5 mtrtype - straight length - 2.5 mdimensions - bottom 10x10 cm square, top 8x8 cm square. cement concrete mix - cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is : 456:2000 reinforcement - 4 round vertical bars of 6 mm diameter. 11 no. of stirrups of 6 mm diameter round ms bars 20 cm centre to centre. hooks- 5 no, bottom hook should be provided 60 cm above the bottom of the polemanufacturing- in order to ensure desired compressive strength , rcc fencing poles should be compacted with the help of platform vibrators. surface should be uniform and free from voids. the concrete cover over the reinforcement should not be less than 1.5 cm.

Central Government/Public Sector

CTN :39950504 Due date: 19 May, 202519 May, 2025 NA
Tender For corrigendum : supply of one coach set of aluminium extrusions and mouldings for lwscn-p p2 amrit bharat coaches, consists of : 1. extrusion to drg no.755-4-2-002,alt-c, item no. 1 1, lenght-1700 mm - 46 nos. 2. extrusion to drg no.755-4-2-002,alt-c, item no. 10, lenght-17 80 mm - 23 nos. 3. moulding to drg.no.755-4-3-002, alt-a, item no. 13, a)length-1850mm -20 n os , b)length-2110mm -10 nos , c)lenghth- 600mm -10 nos. 4. moulding to drg.no.755-4-3-00 2, alt-a, item no. 17, length-1850 mm - 20 nos. 5. extrusion to drg.no.aaa-4-4-586, alt-nil, le ngth-2000 mm - 60 nos. 6. flat moulding to drg.no.icf/std-4-3-008, alt-s, item -1, length-200 0 mm without holes-20 nos. 7. aluminium extrusion to drg.no.aaa-4-4-550, alt-nil,length 2 000mm (h)-60 nos. 8. aluminium extrusion to drg.no. icf/mrvc/c/bt-4-2-010, alt-nil, item-2, l ength- 2000 mm (p)-34 nos. 9. cover and ectrusion to drg no. 755-4-4-001,col-1, alt-g, item no.34 to 36. 10. extrusion to drg.no.dmu/tc/ss(529)-4-2-009,item no.1,length -2000 mm- 5 n os. 11. flat moulding to drg. no. 975-4-3-003,alt-a,item no. 5 - 4 nos. 12. aluminium extrude d angle moulding to drg.no.cc43353,anx-2,alt-a, length- 2000 mm -6 nos. 13. covering for emergency brake pull box to drg no. 581-3-5-035, alt-c-10 nos. 14. pelmet to drg.no 755-4- 4-002,alt-a, item no.9 - 2 nos. powder coating color shade to be in ral 0909005. necessary protective films to be provided in all visible surface of the item. [ warranty period: 30 mo nths after the date of delivery ]

State Government

CTN :40152351 Due date: 20 May, 202520 May, 2025 14.88 Lacs
Tender For corrigendum : providing wbm and bt surface on bodade tembwadi shri sateri mandir anganwadi road ch 0/00 to 1/00 vr 68 tal dodamarg

State Government

CTN :40034557 Due date: 23 May, 202523 May, 2025 NA
Tender For corrigendum : supply delivery and installation of different pumping machinaries at rajnagarghat intake pumping station for augmentation of surface based piped water supply scheme under northern and southern sector of manikchak, englishbazar, kaliachak-i, ii, iii b

State Government

CTN :40320389 Due date: 28 May, 202528 May, 2025 20.40 Lacs
Tender For shifting of damages upvc pipelines occurred during widening of road and construction of surface drain under chakdah zonal ohr under nadia arsenic division-i, p.h.e. dte.

State Government

CTN :40095274 Due date: 03 Jun, 202503 Jun, 2025 NA
Tender For corrigendum : providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms

State Government

CTN :40137671 Due date: 24 May, 202524 May, 2025 90.32 Lacs
Tender For corrigendum : laying of distribution pipe line of different dia. m.s pipeline of damage portion due to road widening for culvert crossing with allied works under aug. scheme of diamond harbour-i, zone-iv, x and iii in mega surface w/s scheme for falta-mathurapur.

State Government

CTN :40137603 Due date: 24 May, 202524 May, 2025 95.10 Lacs
Tender For corrigendum : construction of pipe carrying structure with laying of different dia. m.s distribution line for crossing of culvert with allied works under aug. scheme of diamond harbour-i zone-ii and zone-viii within mega surface w/s scheme for falta- mathurapur.

State Government

CTN :39704613 Due date: 17 May, 202517 May, 2025 10.87 Lacs
Tender For corrigendum : road restoration under diamond harbour ii block bituminous road and concrete road under zone-vi (khordha) under pwd and diamond harbour ii panchayat samiti / block under j.j.m within mega surface water-based water supply scheme for falta-mathurapur.
 Loading, Please wait...

Connect us via What's Up